Wash-in waterproofing for wet weather clothing. Adds water-repellency and revives breathability to fabrics without wicking liners and for reproofing Páramo Analogy garments. 300ml.

• Adds / renews water repellency and revives breathability
• Prolongs the life of gear and optimises outdoor performance
• Easy to apply - can be used in a washing machine, no tumble drying required
• Will not affect cosmetic appearance
• WaterBased - environmentally friendly, biodegradable, non flammable, non hazardous
• Does not contain fluorocarbons
• Guaranteed performance for 4 years from manufacture

  Ideal for:

• Clothing with drop liners
• Microporous coatings
• Gore-Tex
• Sympatex
• eVENT
• Tripple-Point Ceramic
• Microfibre fabrics
• Breathable laminate

  For best results remove all non-washable parts and always clean item(s) first with Nikwax® Tech Wash® in a separate wash cycle. No need to dry item(s) before waterproofing. Shake well before use. Follow care label instructions.

  Machine Wash:

  1. Remove all detergent build-up from the detergent dispenser.
  2. Place maximum of 2 clean garments in washing machine.
  3. Use 2 full caps (100ml) per garment.
  4. Run 30o synthetic cycle and slow spin.

  Do not machine wash garments if taped seams have become dislodged.*

  Hand Wash (use gloves):

  1. Immerse 1 clean garment in 6L of hand-hot water in a bowl or sink.
  2. Add 1 full cap (50ml) of TX.Direct.
  3. Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly.
  4. Rinse with cold water until water runs clear.

  Drying: Air dry or tumble dry on a low setting if care label allows. To maintain waterproofing always wash with Nikwax® Tech Wash®. Do not use detergents. *Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying.

  After cleaning and re-proofing clothing, maintain its waterproofing qualities by frequent cleaning with Nikwax Tech Wash. After 6 to 8 washes with Nikwax Tech Wash, re-apply Nikwax TX.Direct to re-proof. Remember you don’t have to wait to dry between cleaning and re-proofing.